Contact Us
Question about this product?

Customer Service Phone:


First Name:

Email Address:

Phone Number:


High Modulus Carbon fiber sheet 0.12" thickness (1/8th inch)

High Modulus Carbon fiber sheet 0.12" thickness (1/8th inch)
High Modulus Carbon fiber sheet 0.12" thickness (1/8th inch)
Product Code:  PP-CSG121212
Availability:In Stock

Available Options

*Panel Size:

   - OR -   


Our Isotropic and Quasi-isotropic Pre-preg Carbon Fiber sheets are manufactured using Pre-impregnated Aerospace-Grade Carbon Fiber Fabric. This means that the carbon fiber cloth used in the manufacture of these carbon fiber panels and carbon fibre plates is saturated with resin prior to the layup. This allows us to provide you with a lighter and stronger part than Carbon Fibre sheets made using  traditional  Vacuum infusion methods. Once the prepreg Carbon Fibre panel has been laid-up to your required thickness; it is then placed in to a Vacuum chamber and heated to the appropriate temperature for the resin to activate and fully cure.  The end result of this process is an Engineered Carbon Fiber Plate that is significantly stiffer, stronger and lighter than our competitors products

We offer these Pre-impregnated Carbon fiber products  in thicknesses ranging from 0.04 ( 1/25th in. )  All the way up to 1 in.  Both isotropic and Quasi-isotropic  layups are availabe to suit your needs for structural and non structural use.

***These Carbon Fiber Plates can be machined to your specifications at an additional cost. ***

Pre-preg Carbon Fiber Sheets, Prepreg Carbon Fiber panel, Carbon fibre plates, Engineered Carbon Fiber plate, Vacuum infusion, Carbon fiber cloth, Carbon Fiber cloth


Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating:Bad           Good

Enter the code in the box below:

illstreet Composites, LLC