Contact Us
Question about this product?

Customer Service Phone:


First Name:

Email Address:

Phone Number:


Orange Tooling Polyester Gelcoat – Gallon

Orange Tooling Polyester Gelcoat – Gallon
Orange Tooling Polyester Gelcoat – Gallon
Scroll and tap to view images
Orange Tooling Polyester Gelcoat – GallonOrange Tooling Polyester Gelcoat – Gallon
Product Code:  GEL-OR100
Reward Points: 4
Availability:Out Of Stock
Price in reward points: 287
   - OR -   

Orange tooling polyester gelcoat, polyester resin, fiberglass, carbon fiber

Orange Tooling Polyester Gelcoat

Our Orange Tooling Polyester gelcoat is designed for use in composite tooling applications such as mold building and fiberglass composite construction and cultured marble.

Please note: Our Surfacing wax (sanding aid) is required for your finish coat in order to sand/polish this product.

Color: Orange 

All gelcoat prices include catalyst.
1 Quart= 1oz, 1 Gallon=3oz, 5 Gal=13oz


Polyester Gelcoat is used to provide a high-quality visually pleasing finish on the surfaces of a fiber-reinforced composite material. The most common gelcoats are based on epoxy or unsaturated polyester resin chemistry. Gelcoats are modified resins that are applied to molds in a liquid state. Once cured, the gelcoat forms cross-linked, polymers and are then backed with a composite matrix. Often this matrix is a mixture of polyester resin, fiberglass, carbon fiber ; and in some cases epoxy resin with fiberglass.

When fully cured, the reinforced composite is removed from the mold,  and will present the finished gelcoat surface. This is usually pigmented to provide a glossy surface, which improves the aesthetic appearance of the completed composite, such as a fiberglass boat hull or carbon fiber hood.

Many wood or fiberglass boats and aircraft are manufactured using carbon fiber and fiberglass composite materials with an outer layer of gelcoat, typically 0.5 mm to 0.8 mm (0.02 in to 0.03 in) thick. Polyester gelcoat is designed to be durable, and provide protection from the ultraviolet rays of the sun and water.

Specialized gelcoat such as those used for tooling can be used to manufacture the molds, which in turn are used to manufacture composite parts. These gelcoats have a very high level of durability to overcome the mechanical and thermal stresses during the curing and de-molding processes.

In addition to any pigment a gelcoat will, if necessary, contain a thixotropic additive to assist its ability to stick to vertical portions of the mold while curing.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating:Bad           Good

Enter the code in the box below:

illstreet Composites, LLC