Contact Us
Question about this product?

Customer Service Phone:


First Name:

Email Address:

Phone Number:


Expanding Foam - 2 LB Density – 16lb kit (8 cubic ft coverage)

Expanding Foam - 2 LB Density – 16lb kit (8 cubic ft coverage)
Expanding Foam - 2 LB Density – 16lb kit (8 cubic ft coverage)
Scroll and tap to view images
Expanding Foam - 2 LB Density – 16lb kit (8 cubic ft coverage)Expanding Foam - 2 LB Density – 16lb kit (8 cubic ft coverage)
Product Code:  CREFOM0216
Reward Points: 5
Availability:In Stock
Price in reward points: 323
   - OR -   


Expanding Foam, Pour Foam, 2 part Foam, AB Foam, Marine FoamOur expanding foam comes in 2 part kits. This kit includes the AB Foam Components. Just mix it and pour in place.

This pour foam has a 2 lb density and includes 16 pounds in a kit. If you were to mix the entire kit contents you will get about 8 Cubic Feet of coverage.

This expanding foam is often used in marine foam applications such as boats, as well as  foam insulation, blocks, arts and crafts, composite reinforcement, etc.

(U.S. Coast Guard Compliant Marine Foam)

* This two-part liquid, expanding rigid urethane foam is a closed cell, pourable foam, which will resist the absorption of water.
* The densities shown refer to the weight per cubic foot of expanded foam (12" x 12" x 12").
* Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting.
* This product can be poured in multiple layers with excellent bonding between layers.
* All expansion rates and times given are temperature critical. Temperatures below 75 degrees F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75 to 80 degrees F or above.
* Accurate measuring of these products is extremely critical.
* Working time before foaming: approx. 45 seconds
* Time before full expansion: approx. 5 minutes
* The lightweight foam is commonly used for filling voids, filling under decks and practically any other flotation or insulation application. Higher densities are used for architectural castings, support applications and has virtually an unlimited number of potential uses.

4LB Kit = Approx 1.7 quarts
16LB Kit = Approx 1.8 gallons
80LB Kit = Approx 9 gallons

Product Information
Free Rise Density: 2.0 lbs cubic ft.
Expansion Rate: Approx. 25-30x Liquid Volume
Buoyancy (flotation): 60 LBs per Cubic Ft.

Physical Properties
Parallel Compressive Strength: 40 psi
Tensile Strength: 30 psi
Shear Strength: 30 psi
Flexural Strength: 50 psi


For frequently asked questions about expanding foam check out this resource by clicking here

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating:Bad           Good

Enter the code in the box below:

Video Example of 2lb Density Expanding Foam AKA Polyurethane Two Part AB Pour Foam
16lb Kit Featured. Different Quantities and Densities are available

2lb Expanding Foam Density Example after Curing
illstreet Composites, LLC