Carbon Fiber Sheet Tech Data

Article	Synopsis
Carbon Fiber Sheet Deflection	Central Plate Deflection of Carbon Fiber Plates as compared to 1" thick aluminum and 1" thick steel plates.
Stiffness of a Carbon Fiber Sheet	This article goes into depth discussing the flexural stiffness of illstreet's carbon fiber sheets in quasi-isotropic form as well as bidirectional form as compared to aluminum and steel.
Inserts for Composite Sandwich Panels	Inserts allow bolts to be attached to foam core carbon fiber panels without crushing the panel. Inserts are necessary in thick foam core panels.
Insert Application	This article goes into depth on the installation of inserts in composite panels.
Insert Block Performance Analysis	Certain situations require a block to be installed in cored panels. This article goes into depth on the situations where these blocks are necessary.
Bolting with Counter Bores in Composite Sandwich Panels	In certain situations, bolts should be countersunk into the panel. In our experience, this is necessary when runout must be controlled to a specific amount.
Threaded Insert Pullout Analysis	An analysis of the forces involved in pulling out inserts. This is a necessary read when your inserts will be in tension.
Threaded Insert Torque Analysis	This is a study on the effect of torque on inserts. This is generally important to read when using inserts in any capacity.
Additional studies can be performed by illstreet Composites upon request.

Carbon Fiber Panel, Composite Panel, Carbon Fiber Plate

Additional Pages