SKU: KIT-VBS

Vacuum Bagging Kit

$161.50$211.32

This vacuum bagging kit includes all the materials necessary for you to start using vacuum bag to make your carbon fiber and composite parts lighter, stronger and more still by giving you the ideal fiber to resin ratio. We have chosen the materials in this kit after years of use in our manufacturing division. We stand by each of these products individually, and are proud to offer you all of them at a great value as a kit.

The kit includes a venturi pump that you power with an air compressor but we suggest a minimum of a 2.5cfm pump to achieve full vacuum at 30inhg
Kit Vacuum Source Peel Ply Breather Cloth Vacuum Bag Sealant Tape Tubing Vacuum Gauge Vacuum Bag Connector
Basic Vacuum Bagging Kit
Your Choice
2 Yards
1 Yard
1 Yard
1 Roll (25 ft)
6 Feet
No
No
Advanced Vacuum Bagging Kit
Your Choice
4 Yards
2 Yards
2 Yards
2 Rolls (50 ft)
6 ft
Yes
No
Ultra Deluxe Vacuum Bagging Kit
Your Choice
10 Yards
10 Yards
5 Yards
4 Rolls (100 ft)
12 ft
Yes
Yes
Vacuum bagging also known as Vacuum Resin Transfer Molding or Vacuum Resin Infusion is a process that uses a two-sided mold that shapes both surfaces of a composite part. The lower mold is rigid, and commonly made from Fiberglass and coated with gelcoat. The upper portion of the mold is made from a flexible membrane or vacuum bag. This vacuum bag can be a reusable silicone material or an extruded polymer film. Once the lay up is completed vacuum is applied to the mould cavity and the material is allowed to debulk. This process can be performed at either ambient or elevated temperature with ambient atmospheric pressure acting upon the vacuum bag.  

Reviews

Basic Vacuum Bagging Starter Kit

Rated 3.0 out of 5
May 7, 2018

To be perfectly honest I was kinda disappointed… If you would have provided a picture of what a “Venturi style vacuum generator” looked like for us newbie’s I would have purchased an actual vacuum pump… To pay 190+ and receive a small box with a few pieces of plastic hose and some miscellaneous materials was very disheartening…. Live and learn I guess…. That’s my bad for not researching properly before jumping in with both feet….

RESPONSE FROM VENDOR:

I can understand your point. A lot of people prefer the venturi style over a vacuum pump because there is a lower barrier to entry since it just uses an existing air compressor. If you haven’t used it, just send it back and we can swap you out for the difference.

Victor gonzalez
Verified

Leave Your Review