SKU: EPXTHN

Laminating Epoxy Resin System

$19.50$420.00

Our Resin System is a high quality resin which is popular for lamination with fiberglass, carbon fiber, kevlar or any type of reinforcement. The syrup-like consistency will generate fast wet-out and easy application of any reinforcement. This Resin System will produce a low viscosity, semi-clear, low odor epoxy that is not only ideal for layup use, but also as a sealer of porous substrates such as wood because of its penetrating power. You can easily make an adhesive, fairing putty or filler when combining the Resin System with a product from our selection of powder fillers.

Our Resin System is a high quality resin which is popular for lamination with fiberglass, carbon fiber, kevlar or any type of reinforcement. The syrup-like consistency will generate fast wet-out and easy application of any reinforcement. This Resin System will produce a low viscosity, semi-clear, low odor epoxy that is not only ideal for layup use, but also as a sealer of porous substrates such as wood because of its penetrating power. You can easily make an adhesive, fairing putty or filler when combining the Resin System with a product from our selection of powder fillers. 

# Resin Viscosity: 600 cps
# Epoxy resins require a hardener to initiate curing which is included in the kit.
# Thin Resin can be used with your choice of 3 different hardeners.
# To Determine Final Volume, add the resin and hardener amounts given
* Mixing Ratio by Volume: 2:1

We recommend choosing your hardener below based on your temperature, curing thickness, desired working time and desired drying times.

Fast
* Pot Life: 25 Min @ 80F
* Set Time: 1-2 Hours
* Drying Time: 3-4 Hours 

Medium
* Pot Life: 30-35 Min @ 80F
* Set Time: 3-4 Hours
* Drying Time: 8-10 Hours 

Slow
* Pot Life: 45-50 Min @ 80F
* Set Time: 5-6 Hours
* Drying Time: 24-28 Hours

Kit Pricing Includes RESIN and HARDENER
Pumps can also be purchased separately

 

Description of Epoxy Hardeners

All working times(pot life) are based upon an optimum working temperature of about 80 degrees F. Temperatures variations will greatly affect curing times, and when below 65F can sometimes double curing times. Other factors that affect epoxy curing can be moisture and humidity, as well as the thickness of lamination.

Description of Times Shown
* Pot Life: Represents the maximum amount of time that the mixture can remain in your pot. Once applied to your working surface(usually in thin layers) this will greatly increase the time you have before the epoxy sets.
* Set Time: This is the amount of time after the epoxy is applied in a thin film that it will arrive at a gel state, still wet, but no longer a liquid. To recoat without sanding between coats you must reapply after this point but before the drying time has completed.
* Drying Time: At this point the epoxy will be ready to sand and has reached about 90% of its cured hardness. Epoxy still might remain a bit flexible at this point but will complete 100% curing over the following 1-5 days.

Reviews

Laminating Epoxy Resin System

Rated 5.0 out of 5
February 1, 2023

Easy to use. Works well with carbon for a bicycle frame repair.

William
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
October 19, 2021

I’ve been using this resin and hardener for some time and it works very well in laminating carbon fiber cloth material. In my experience this product cures reasonably quickly and always stays clear….never turning yellowish. It’s also a great value for the money usually lasting me for several projects.

rene b
Verified

Laminating Epoxy Resin System

Rated 4.0 out of 5
March 24, 2020

Great product and value. Thickness makes mixing and measuring a challenge, but the hardener thins it out to a reasonable consistency for actual use.

David Allen
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
February 28, 2019

Great product and price is reasonable. Just found the pumps to be worthless.

David
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
January 22, 2019

Great prices on quality epoxy. Look forward to doing business with LeapTech again.

Matt
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
January 2, 2019

Used with microballons to make a adhesive to bond foam to wood for cowl plug. This epoxy resin is fantastic. The next day ot was fully cured and ready for sanding. Temperature was around 70 degrees in shop. Great value will buy again.

Bryan k
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
June 20, 2018

Rapid order fill and timely information on shipping. Very pleased.

jim
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
April 30, 2018

This epoxy is the best. I have used 2 gallons so far and for the price it can’t be beat. I will be getting more soon.

David B
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
April 30, 2018

I love this epoxy and this is the best value IMO, I love the way it dries clear and the working time is longer than the other brands. I also love the video how to pour the resin from the 5gal container.

David B.
Verified

Laminating Epoxy Resin System

Rated 5.0 out of 5
April 2, 2018

Great value low blush epoxy.

Michael E Mattson
Verified

Leave Your Review