Categories
Contact Us
Question about this product?

Customer Service Phone:

877-696-4455

First Name:

Email Address:

Phone Number:

Message:

Premium Polyester Resin for Composite Layup (Gallon)

Premium Polyester Resin for Composite Layup (Gallon)
Premium Polyester Resin for Composite Layup (Gallon)
Scroll and tap to view images
Premium Polyester Resin for Composite Layup (Gallon)Premium Polyester Resin for Composite Layup (Gallon)
Product Code:  HX6736-100
Reward Points: 2
Availability:In Stock
Price:$27.74
Price in reward points: 138
Qty:  
   - OR -   

polyester resin, composite layup, boat repair, fiberglass repair, composite parts manufacturing

 

Our Premium Polyester Resin is a pre-promoted thixotropic unsaturated polyester resin blend, for the fabrication of reinforced fiberglass products.

This resin system exhibits high quality material properties sought after by laminators. 
   
The gel time of this polyester resin is affected by catalyst concentration and temperature. Catalyst selection, humidity, pigments, fillers, and other additives may cause variations in cure characteristics. For verification, it is recommended that the fabricator check the cure characteristics of a small quantity of resin under his operating conditions.

Features and Benefits
•    Fast Wet Out
•    Non-Draining
•    Fast Even Cure Rate

Suggested Applications   
•    Boats                 
•    Hand Lay Up
•    Spray Up
•    Thin FRP Parts

Polyester Material Info:
Polyester resins are the most commonly used matrix in the marine and composite industry. These resins are styrene-based, flammable and catalyzed when combined with Methyl Ethyl Ketone Peroxide(MEKP). When working with these resins in large projects it is advised to use gloves and a chemical respirator to protect yourself from the fumes. These resins can be used with any type of fiberglass, carbon fiber or kevlar, as well as used over urethane foam and other sandwich core materials. These resins tend to be fairly rigid when cured and also more brittle than epoxy resins.
Sales Info:
All resins and gelcoats are sold without wax(sanding aid): If needed you can purchase surfacing wax separately for use on finishing coats. Unwaxed resin can be re-coated with little to no prep work but will leave a tacky surface. Mix the wax(sanding aid) with your resin only on your final coats in order to allow easy 

sanding. Catalyst/Mixing Ratios: All resin prices include catalyst. 1 Quart= 1ounce, 1 Gallon=2ounce, 5gal=6ounce. The amounts included can be varied based on your temperature and desired curing times. Cooler temperatures may require a higher % of catalyst than warm conditions. If additional catalyst(MEKP) is needed please order separately.
Shipping Info:
Because polyester resins are a flammable liquid, we are unable to ship these products by air freight. Quarts and Gallons can be shipped by Ground with no extra fees with a maximum of one gallon per box. 5 Gallon pails can be shipped by UPS Ground only and require an additional $30.00 Hazardous Fee. Orders for multiple 5 GAL pails can be shipped by a common carrier(freight line) but require delivery to a commercial location.

 

Write a review

Your Name:


Your Review:Note: HTML is not translated!

Rating:Bad           Good

Enter the code in the box below:



Tags:
illstreet Composites, LLC